If your own home is old or was constructed utilizing less-than-stellar supplies and workmanship, you would possibly see cracks, holes, or water harm in your drywall. Additionally, “a very powerful factor with a restore is to construct the joint out wider than you’ll usually,” says drywall contractor Rick Schwartz, who serves as secretary treasurer of Marietta Drywall in Marietta, Ga. The bottom line is to go away a large and very shallow slope on all sides, he says. If the bead is dented, use a metallic-cutting hack noticed to cut via the bead above and beneath the broken area (picture 1). Then use a utility knife to cut vertically across the nook bead (image 2). Corner bead is usually connected with drywall nails, so use a pry bar or claw hammer to remove the fasteners.

Drywall knife to apply the first layer of drywall compound over the tape. Typically you will discover a wire, pipe or duct (Photo 1). If that’s the case, work fastidiously around them with a drywall or keyhole noticed. Enable the textured compound to dry in response to the manufacturer’s instructions, then prime and paint the surface. Upon surveying the injury, they will choose the precise …