Drywall texture is simple and an inexpensive approach for wall ornament. They require solely fundamental instruments and some drywall joint compound Also be prepared to touch up or paint the repaired space. Totally smear the backerboard with joint compound (this glues” it to the inside wall face), and use a string to hold it in place while the compound dries. Cut out a bit of broken drywall tape in an inside corner, then apply a bed of drywall compound.
Squeeze some, but not all, of the compound out from underneath the tape so you do not create a big hump on the wall. A popped nail is not holding in the stud and backs out of the drywall, creating a popped nail head. Though the drywall is rarely in danger of falling off the wall, the bumps are visible and unsightly. It isn’t crucial to strengthen the horizontal edges of the alternative drywall.
When making use of the compound, hold the knife at a 70-degree angle and swipe across the crack. Let dry, then add a third coat to smooth any remaining uneven areas. Apply several skim coats of drywall compound over the repaired area. When doable, depart a number of inches of drywall at corners so you won’t should spread taping compound onto adjoining walls or ceilings and repaint them as effectively!
Once dry, frivolously sand the area until smooth. In addition to the patch, you want drywall patching compound to clean out the patch and a putty knife to unfold the drywall compound over the patch. Use metal snips to chop a section of new nook bead to suit the repair area (picture three). Apply a coat of joint compound to the nook, set the bead in place then apply one other layer of joint compound over it. Let dry fully then add another layer or two of compound depending on what is required (image four).
Drywall is comparatively simple to put in and simple to restore. Crease the paper tape down the center so it matches into the nook easily (Picture 2). It is difficult to unfold compound easily on one side of the corner without marring the opposite aspect. It is simpler to add backer board than to attempt to minimize the drywall over studs (Photograph 2) as you learn to repair drywall.